The Fluke Networks PRO3000F60KIT Filtered Probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment. Depending on the region, signal interference may be at 60 Hz, with is most common in North America, or 50 Hz, which is more common in Europe and Asia. For this reason, there are 2 versions of the Pro3000F Filtered Probe. The PRO3000F60KIT and its probe obstructs 60 Hz signals and its harmonics.

Technicians can also switch between filtered and unfiltered modes with a simple push of a button. The PRO3000F60-KIT's loud speaker also allows for use in the noisy locations and for tracing cable through drywall, wood and other enclosures. The probe also touts an auto-off feature that deactivates the probe after 5 minutes to conserve battery life.

The PRO3000F60-KIT Filtered Probe and Tone Generator Kit becomes more useful when paired with the Pro3000 Tone Generator. The Tone Generator allows for direct connection to unterminated wire using the angle bed of nails clips or terminated RJ-type jacks with the male RJ-11 plug. The Tone Generators strong tone and SmartTone technology allows for precise pair identification up to 10 miles (16 km) away.

Use the SmartTone capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change the cadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone provides five distinct tones for the exact pair identification.