This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Agilent Used 8510C
Microwave Network Analyzer, 110 GHz, Refurbished
8510C-U
8510C
8510C
Agilent Used 8510C
Microwave Network Analyzer, 110 GHz, Refurbished
8510C-U
8510C
8510C
- All source control is provided from the HP 8510C front panel.
- Hard copy plots are automatically produced by the HP 8510C when used with an HP-GL compatible plotter using either the system bus (HP-IB compatible) or serial output interface (RS-232-C).
- The HP 8510C system bus is an HP-IB port used exclusively by the HP 8510C to control and extract information from the other instruments in the system such as the RF source, test set, and the digital plotter.
- All source control is provided from the HP 8510C front panel.
- Hard copy plots are automatically produced by the HP 8510C when used with an HP-GL compatible plotter using either the system bus (HP-IB compatible) or serial output interface (RS-232-C).
- The HP 8510C system bus is an HP-IB port used exclusively by the HP 8510C to control and extract information from the other instruments in the system such as the RF source, test set, and the digital plotter.
HP 8510C system can be easily configured for making measurements at millimeter-wave frequencies. Hewlett Packard offers hardware for configuring systems in the 26.5 to 40 GHz, 33 to 50 GHz, 40 to 60 GHz, 50 to 75 GHz, and 75 to 110 GHz waveguide bands. These S-parameter configurations allow both forward and reverse measurements to be made with a single connection to the device under test. The greatest convenience and highest accuracy is assured through the TRL (Thru-Reflect-Line) calibration technique, which is now possible with a millimeter-wave S-parameter configuration.
Brand | Refurb. Agilent |
---|---|
Catalog | 8510C |
Condition | REFURBISHED |
Vendor Alias | 8510C |