This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Megger CFL510G
Handheld Time Domain Reflectometer, 30 ft. to 15,000 ft. Range, 0.3 ft. Min. Resolution
CFL510G
CFL510G
1001-790
Megger CFL510G
Handheld Time Domain Reflectometer, 30 ft. to 15,000 ft. Range, 0.3 ft. Min. Resolution
CFL510G
CFL510G
1001-790
The Megger CFL510G Handheld Time Domain Reflectometer features a simple selection option and is designed for locating faults on metallic cables such as twisted pair copper and coax cable. Any cable test requirement can be met with the maximum range, minimum resolution, four output impedances, and velocity factor of this unit.
- Maximum Range: 5 km/15000 ft
- Minimum Resolution: 0.1 m/0.3 ft
- Output Impedances: 25/50/75/100Ω
- Velocity Factor: 0.2 - 0.99
- Designed for use on all metallic cable pairs
- AUTO selection option ensures effective selection of parameters and rapid results
- Dual cursors provide complete flexibility and instant indication of distance between two points
- 2 ns pulse width virtually eliminates dead zones
- Easy one-button press HOLD feature allows comparison between cable conditions
- Ranges: 30 ft, 75 ft, 300 ft, 750 ft, 3000 ft, 7500 ft, and 15,000 ft
- Minimum resolution of 0.3 ft. (0.1 m)
- Auto-selected output impedance (between 25, 50, 75 and 100 ohms)
- AUTO option for selecting gain and pulse for each range
- Power blocking filter not required
- May be used on telecom circuits or 150 V CATIV power circuits
- Graphical monochrome LCD (256 x 128 pixels) equipped with adjustable display contrast and white-light backlight
- Suitable for both indoor and outdoor use with IP54 rating
- Distance displayed in meters or feet
- Uses five AA batteries with up to 14 hours battery life
The Megger CFL510G (1001-790) is a handheld, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft. and a 5 km/15,000 ft. maximum range depending on velocity factor selected and cable type. Four output impedances (25, 50, 75, and 100 ohms) are available and a velocity factor between 0.2 and 0.99 will meet any cable test requirements.
The CFL510G has a simple selection option which, together with a four-way control switch, offers an intuitive operation for the user.
Applications
The CFL510G is primarily designed for linemen in both the communication and power industries. Specific capabilities include:
Telephony
The CFL510G provides fast and accurate results when uncovering transmission related problems. It is designed to be carried on a linesman's belt and used in the first line of defense when diagnosing and locating cable faults.
Specific line activities identified by this unit include:
- Bridge taps and splices n Presence of water in the cable
- Opens in tip, ring, or sheath
- Shorts between tip, ring, and/or sheath
- Capacitive networks
- Load coils
- Wet splices and high-resistance splices
CATV/Cellular
The CFL510G is ideal for testing the physical integrity of cables within a network. The unit is also capable of locating illegal cable taps.
Specific cable conditions identified include:
- Bends or crimps in the cable
- Cuts or shorts in the cable
- Taps and splits
- Water saturation
Power
The CFL510G is an ideal tool for identifying faults on secondary power cables. This unit identifies:
- Burnouts in aluminum conductors
- Good splices, wet splices, and high-resistance splices
- Shorts between phases
| Country of Origin | United Kingdom |
|---|---|
| Brand | Megger |
| Catalog | 1001-790 |
| Condition | NEW |
| Vendor Alias | 1001-790 |
- 1 - CFL510G Handheld TDR (1001-790)
- 1 - Miniature Clip Test Lead Set (6231-652)
- 1 - Bed of Nails Test Lead Set (6231-653)
- 1 - Socket BNC to 2x4mm, 50 Ohm (25965-154)
- 1 - Hard Carrying Case (5410-420)
- 1 - User Guide CD
