Megger DCM1500S

True RMS AC/DC Solar PV Clamp Meter with Bluetooth Communication, 2000V DC, 1500V AC, 1500A AC/DC

DCM1500S
DCM1500S
1013-357

Megger DCM1500S

True RMS AC/DC Solar PV Clamp Meter with Bluetooth Communication, 2000V DC, 1500V AC, 1500A AC/DC

DCM1500S
DCM1500S
1013-357

The Megger DCM1500S True-RMS AC/DC Solar Clamp Meter is ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well standard AC or DC electrical equipment.

  • Max Voltage: 2000V (DC)
  • Max Voltage (TRMS): 1500V with use of PVHV Leads (AC)
  • Max Current: 1500A (AC/DC)
  • Bluetooth connectivity allows monitoring on smart phone or tablet via Megger Link app
  • Automatic torch within jaw lights up poorly lit areas
This product is available for shipping to the US, Canada, and Puerto Rico only.
$585.00
This item ships FREE
In stock: 1 Units
  • Measures voltage up to 2000V DC and TRMS 1500V AC
  • Measures current up to 1500A AC/DC
  • Bluetooth connectivity allows monitoring on smart phone or tablet via Megger Link app
  • Auto-ranging ensures easy operation
  • Performs inrush current measurement
  • Smart hold function allows increases in measurements to be monitored with audible tone
  • MIN/MAX hold provides ability to measure maximum and minimum values over period of time
  • Offers μA and DC mV measurement ranges
  • Resistance, Diode, Capacitance and Frequency measurement
  • Measures °C/°F temperature with included thermocouple probe
  • Includes PV test leads with MC4PV plugs for solar/photovoltaic installations
  • Offers internal data logging for up to 1000 records
  • Large white LED backlit display with 6000 counts
  • Offers manual DC Amp zeroing
  • Illuminates torch light on trigger push
  • Includes manual save mode
  • Auto Power off function for battery savings
  • Rated to CAT IV 600V / CAT III 1000V

The Megger DCM1500S (1013-357) True RMS AC/DC Solar Clamp Meter measures up to 2000V DC and 1500V AC (using the PVHV Leads), as well as 1500A AC or DC, making it ideal for use in the installation, maintenance, monitoring and testing of photovoltaic systems as well standard AC or DC electrical equipment.

The meter is supplied with both standard 4mm leads as well as the new PVHV1 (4mm) and PVHV2 (MC4PV) HV lead sets. It has a large clear backlit display and an automatic torch in the jaw to support use in poorly lit areas.

Using the free Megger Link App, the measurement value can be remotely monitored on a smart device using the built-in Bluetooth. This will give a live trend graph and offer the ability to sample and log the values for later analysis.

The smart data-hold expands the standard hold function by giving the operator an audible warning if the "held" reading increases by 50 counts or above. Min/Max hold provides the ability to measure the maximum and minimum values over a period of time, with each value selectable in turn.

Other features include a High Frequency Rejection Filter, inrush current measurement, internal data logging, a non-contact volt seek mode and manual DC Amp zeroing.

In addition to voltage and current measurement, the DCM1500S has the ability to measure Resistance, Diode, Capacitance, temperature and Frequency. The DCM1500S is safety rated to IEC 61010-1 and IEC/EN61010-2-033 CAT IV 600V, and CAT III 1000V.

Application

The DCM1500S is designed to be used on electrical systems and equipment, including Solar/Photovoltaic installations where there is a need to measure current, volts, resistance and frequency. It is therefore intended for use while installing, maintaining, fault-finding or monitoring those systems.

The tactile barrier below the jaws of the instrument ensures a safe working distance for the operator's hand when measuring current on live uninsulated conductors, although additional personal protection must still be used.

The Smart Hold allows increases in measurements to be monitored with an audible tone.

The Max/Min and In-rush modes enable maximum load currents from equipment to be identified such as start-up currents to motors and heaters.

More Information
Country of OriginTaiwan
BrandMegger
Catalog1013-357
ConditionNEW
Vendor Alias1013-357
  • 1 - DCM1500S Solar Clamp Meter (1013-357)
  • 1 - DCM 4mm Spare Lead Set (1013-358)
  • 1 - TP-90 Thermocouple Probe (1013-364)
  • 1 - PVHV1 Lead with 4mm Plugs (1013-362)
  • 1 - PVHV2 Lead with MC4PV Plugs (1013-363)
  • 1 - Hard Carry Case