This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Megger DLRO10X + DH4-C
Digital Low Resistance Ohmmeter, 10 A, with Memory and Keypad
Megger DLRO10X + DH4-C
Digital Low Resistance Ohmmeter, 10 A, with Memory and Keypad
The Megger DLRO10X Digital Low Resistance Ohmmeter sets the standard for low resistance measurement. The DLRO10X is a fully automatic instrument, selecting the most suitable test current up to 10A DC to measure resistance from 0.1 microohm to 2000 ohms on one of seven ranges.
- Provides accurate results in under three seconds
- Automatically detects continuity in potential and current connections
- Offers multiple operating modes including fully automatic
- Provides accurate results in under three seconds
- Automatically detects continuity in potential and current connections
- Offers multiple operating modes including fully automatic
- Automatic current reversal cancels standing emfs
- Uses four-terminal measurement to eliminate errors caused by lead resistances
- Avoids heating test sample through 250 mW power limit (with optional override)
- Alpha-numeric keypad allows for entering of test notes
- Interchangeable test lead terminations
- User selectable high and low limits
- Auto-ranging and manual options
- Visible warnings for high voltages at terminals and for current flowing in test sample
- Bright LCD display facilitates operation in poorly lit environments
- On-board memory stores up to 700 sets of results and notes
- Data may be transferred to PC via RS232 connector
- Lightweight and portable size allows for use in tight places
- Output for printer
- Powered by rechargeable NiMH battery
The Megger DLRO10X (6111-429) Digital Low Resistance Ohmmeter sets the standard for low resistance measurement. The DLRO10X is a fully automatic instrument, selecting the most suitable test current up to 10 A DC to measure resistance from 0.1 microohm to 2000 ohms, on one of seven ranges.
The DLRO10X uses a menu system controlled by a two-axis paddle to allow the user to manually select the maximum test current. The instrument is built into a strong, lightweight case that is equally suitable for use in the field or in the laboratory. Light enough to be worn around the neck, it is small enough to be taken into areas that were previously too small to access.
The DLRO10X has a large, backlit LCD display. Normally, measurements are made with forward and reverse currents to cancel the effects of any standing voltages across the test sample. The average value is then displayed within 3 seconds, to a basic accuracy of 0.2%. The DLRO10X displays both forward and reverse measurements as well as the average of the two. It furthermore allows the user to set high and low pass limits, thereby enabling simple go-no-go testing.
The DLRO10X is supplied with a Nickel Metal Hydride (NiMH) battery pack. The battery packs are interchangeable so that an exhausted battery may be recharged using the external charger supplied while testing continues using a spare pack. Although full charging will take 4 hours, a fast charge mode allows the battery to be 90% charged within 2 1/2 hours from a 12 volt battery or from a standard 120/230 V AC supply via the supplied charger. The battery pack contains its own battery state indicator, which allows the charge-state to be monitored, even without being connected to the instrument.
The DLRO10X is fitted with RS232 communications that will allow results to be downloaded in real time or stored for later retrieval. Up to 700 sets of results may be stored within the DLRO10X complete with notes containing up to 200 characters which may be added using the on board keypad. These results can also be downloaded to a PC.
Vendor Alias | 1006-600 |
---|---|
Catalog | 1006-600 |
Country of Origin | United Kingdom |
Brand | Megger |
Condition | NEW |
- 1 - DLRO10X Digital Low Resistance Ohmmeter (6111-429)
- 1 - 7 Ah NiMH Battery Module (6121-492)
- 1 - DH4-C Duplex Hand Spikes (including one with indicator lights), 4 ft. / 1.2 m (6111-503)
- 1 - Battery Charger (6280-333)
- 1 - Cigar Lighter Adapter for Battery Charging (6280-332)
- 1 - User Guide