The Megger KC100 (1000-809) Test Lead Set provides a complete and convenient solution to the problem of finding reliable test leads that are long enough for testing the continuity of lightning protection conductors in wind turbines. It is equally suitable for use on site or in the manufacturing plant. The lead set is 10A rated.

The KC100 lead set consists of two test leads. The first is a 5m cable fitted with a duplex handspike for probing the lightning receptors on the tips of the turbine blades. The second cable is 100m, and it is fitted with a large robust Kelvin clip, specially designed to offer ease of use while providing the consistently reliable connections needed to ensure accurate and repeatable test results.

The long cable is wound onto a high quality, robust cable reel fitted with a friction brake to avoid tangles whilst paying out.

The KC100 lead set is intended to measure the resistance of the lightning protection circuit of a wind turbine, either in part in a production environment, or fully assembled during commissioning, maintenance, or following repair. The lead set is designed to be connected to any instruments in the Megger 10 A DLRO range or the Megger BT51. However, for outside use, the DLRO10HD is recommended due to its robustness and high IP rating.