Teledyne FLIR E76-24

Advanced Thermal Imaging Camera with Viewfinder, MSX and UltraMax Technologies, FLIR Thermal Studio Pro, and 24° Lens, 320 x 240, 30 Hz

E7624
E76-24
78512-1101

Teledyne FLIR E76-24

Advanced Thermal Imaging Camera with Viewfinder, MSX and UltraMax Technologies, FLIR Thermal Studio Pro, and 24° Lens, 320 x 240, 30 Hz

E7624
E76-24
78512-1101

The Teledyne FLIR E7624 Advanced Thermal Imaging Camera with 24° Lens includes laser-assisted autofocus and 3 area measurement boxes for more precise target measurements. The 320 x 240 thermal resolution and MSX technology work to produce vibrant imagery for added details and perspective. Images can be directly uploaded to the cloud via FLIR Ignite.

  • IR Resolution: 320 x 240 px
  • Image Frequency: 30 Hz
  • Thermal Sensitivity/NETD: <40 mK at 86°F
This product is available for shipping to the US, Canada, and Puerto Rico only.
$7,999.00
This item ships FREE
  • 24°, 17 mm lens (included): Often considered "standard" lens, 24° x 18° field of view allows users to remain at safe distances from energized equipment (e.g. 3 m/6.6 ft) while still obtaining crisp focus on smaller targets
  • Use Teledyne FLIR 1-Touch Level/Span to instantly improve image contrast and highlight potential electrical or mechanical issues
  • Onboard integration with Teledyne FLIR routing software, built-in mic for voice annotation, and report generation features all help streamline work
  • Display: 4 in., 640 x 480 pixel touchscreen LCD with auto-rotation
  • Teledyne FLIR Inspection Route: Enabled in camera
  • Laser pointer: Yes
  • Programmable buttons: 1
  • Text: Predefined list or touchscreen keyboard
  • Voice: 60 sec. recording added to still images or video via built-in mic (has speaker) or via Bluetooth
  • Communication interfaces: USB 2.0, Bluetooth, Wi-Fi, DisplayPort
  • METERLiNK: Yes
  • Storage media: Removable SD card
  • Video out: DisplayPort over USB Type-C
  • Operating temperature range: -15 to 50°C (5 to 122°F)
  • Safety: EN/UL/CSA/PSE 60950-1
  • Shock and vibration and encapsulation: 25g (IEC 60068-2-27), 2g (IEC 60068-2-6), IP54 (IEC 60529)
  • Storage temperature range: -40 to 70°C (-40 to 158°F)
  • Color palettes: Iron, Rainbow, Rainbow HC, White Hot, Black Hot, Arctic, Lava
  • Detector type and pitch: Uncooled microbolometer, 17 µm
  • Digital camera: 5 MP, with built-in LED photo/video lamp
  • Digital xoom: 1-4x continuous
  • f-number: 1.5
  • Focus: Continuous LDM, One-shot LDM, One-shot contrast, Manual
  • Global Positioning System [GPS]: Automatic image tagging
  • Image frequency: 30 Hz
  • Image sketch: From touchscreen, on infrared image only
  • IR resolution: 320 x 240 pixels
  • Lens identification: Automatic
  • Minimum focus distance: 1.0 m
  • Non-Radiometric IR or Visual Video: H.264 to memory card
  • Non-radiometric IR video streaming: H.264 or MPEG-4 over Wi-Fi MJPEG over UVC or Wi-Fi
  • Picture-in-Picture: Resizable and movable
  • Radiometric IR video recording: Real-time radiometric recording (.csq)
  • Radiometric IR video streaming: Yes, over UVC
  • Spectral range: 7.5-14 µm
  • Thermal sensitivity/NETD: <50 mK at 30°C (86°F)
  • UltraMax: Yes
  • Accuracy: ±2°C (±3.6°F) or ±2% of reading
  • Laser mistance Meter: Yes; dedicated button
  • Measurement presets: No measurement, Center Spot, Hot Spot, Cold Spot, User Preset 1, User Preset 2
  • Object temperature range: -20 to 120°C (-4 to 248°F); 0 to 650°C (32 to 1202°F); Optional 300 to 1000°C (572 to 1832°F)
  • Spot meter: 3 ea. in live mode
  • Battery operating time: >2.5 hours at 25°C (68°F) and typical use
  • Battery type: Rechargeable Li-ion battery
  • Image file format: Standard JPEG with measurement data included; infrared-only mode
  • Image storage mode: Infrared, Visual, MSX, Picture-in-Picture, Gallery

The Teledyne FLIR E7624 Advanced Thermal Imaging Camera, Viewfinder, MSX and UltraMax Technologies, FLIR Thermal Studio Pro, 24° Lens, 320 x 240, 30 Hz offers complete coverage of near and distant targets through a range of interchangeable AutoCal lenses, with fields of view for everything from wide-angle roof inspections to electrical inspections performed from a safe distance. The E76 includes an optional temperature range to 1000°C (1832°F), laser-assisted auto-focus, and 3 area measurement boxes. The 320 x 240 thermal resolution produces crisp, vibrant imagery that can be enhanced with patented Teledyne FLIR UltraMax and MSX technologies for added detail and perspective.

Building Applications

The Teledyne FLIR E76 can detect even subtle indications of building deficiencies and moisture intrusion, and offers on-screen area measurement, so that you can easily quantify and document air leaks, moisture, and other building problems.

True 42° FOV for wide area scans

True 42° FOV

Detects indications of air leaks and building envelope deficiencies

Air Leaks and Envelope Deficiencies

Useful for inspecting radiant heating under floorboards

Radiant Heating Under Floorboards

Inspect for air leaks or water intrusion around windows and doors

Water Intrusion

Find evidence of poor insulation, water leaks, moisture intrusion, and more

Poor Insulation

Use on-camera area measurement to determine the total area of moisture intrustion

Total Area

Identify sources of drafts

Drafts

Find water leaks and moisture intrusion quickly

Water Leaks

Electrical and Mechanical Applications

The Teledyne FLIR E76 offers the superior resolution and range performance needed to quickly identify hot spots and discover potential points of failure in electrical distribution and mechanical systems. With a higher resolution and a larger, more vibrant LCD screen, the E76 makes it easier than ever to diagnose problems, even at a distance. Avoid costly shutdowns and lost production time through regular predictive maintenance routines with this rugged, intuitive camera.

Image notations include distance to target, compass reading, and GPS location data

Image Notations

Survey machinery and electrical systems to assess working condition

Survey Machinery and Electrical Systems

Hot spots on functioning machinery may be an early indication of a problem

Functioning Machinery

Find hot spots in electrical systems

Electrical Systems

Inspect machinery and systems for signs of unexpected heat

Unexpected Heat

Center spot can be moved via the touchscreen to measure different areas of the target

Center Spot

Find faulty electrical circuits before they fail

Faulty Electrical Circuits

High temperatures ranges, up to 1500°C

High Temperature Ranges

MSX Technology

Multi-Spectral Dynamic Imaging (MSX) Technology adds visible spectrum definition to IR images by detecting the edges of objects. Text becomes clearly visible so that you can read a label or identifier within the IR image. This exclusive function provides extraordinary thermal detail that instantly highlights and orients problem locations and eliminates the need to refer back to a visual image for detail.

Breaker panel (MSX)

Breaker panel (MSX)

Missing insulation - summer day (MSX)

Missing insulation - summer day (MSX)

Warm drain pipe - wall (MSX)

Warm drain pipe - wall (MSX)

UltraMax Technology

UltraMax is an image enhancement technology in the E76 that captures a series of thermal images and combines the data into one new image. The result is an impressive quadrupling of thermal pixels, including full radiometric measurement data.

As a result, UltraMax thermal images will be clearer and larger, allowing for a better analysis of small details. Because of an increased number of pixels covering the same target area, UltraMax also decreases measurement spot size. This gives greater measurement accuracy to particularly small details. With the new UltraMax feature, users can obtain even better results, allowing them to be even more productive.

UltraMax is a type of superresolution, a technique for combining the information from multiple original images into an image with higher resolution and less noise. This might seem similar to two other scaling techniques - interpolation and pixel averaging. However, they are totally different.

UltraMax uses the natural movement of the human body to capture an image set in which each image is slightly offset from the others. This results in a wealth of data that is much greater than any one image could provide. The data is combined to form an image that includes many more pixels of the target, resulting in a resolution greater than that of the original camera detector. The data is also used to create a clearer image, since pixel noise can be reduced through comparing similar points in multiple images.

Teledyne FLIR UltraMax captures 16 thermal images in less than one second. These are stored on the camera as a single jpg file, and will appear as one image when viewed on the camera or in software. The enhanced image will have twice the original resolution and four times as many pixels. All pixels still include radiometric data, just as with normal Teledyne FLIR thermal images.

As a result, UltraMax thermal images will be clearer and larger, allowing better analysis of small details. Because of an increased number of pixels covering the same target area, UltraMax also decreases measurement spot size. This gives greater measurement accuracy to particularly small details.

The actual target is 120°F

Actual Target

First reading in native resolution is 98°F; it is limited based on how small or far away target is in relation to spot size of single native image

Native Resolution

During natural movement, UltraMax gains more

Natural Movement

FLIR AutoCal™ LensesClick for larger image

Teledyne FLIR AutoCal Lenses

The E76 camera is compatible with all interchangeable AutoCal lenses. The camera automatically recognizes when a new lens is attached and launches a wizard to begin auto-calibrating the camera with the lens - no need to send the camera in for service. This helps ensure that the camera always produces high-quality images and precise thermal measurements.

Teledyne FLIR Thermal Studio Software: Fast, Efficient Thermal Analysis and Reporting

FLIR Thermal Studio SoftwareClick for larger image

Evaluating, editing, organizing, and reporting thermal images are all critical steps in any thermal survey. Being able to perform these tasks quickly and efficiently allows inspectors to spend more time in the field and less time at their desks. The Teledyne FLIR Thermal Studio software suite makes this happen.

This state-of-the-art analysis software is designed to help users manage thousands of thermal images and videos and quickly produce professional reports. Compatible with files from handheld thermal cameras, unmanned aircraft systems (UAS), and optical gas imaging (OGI) cameras, this software offers the features needed to streamline workflow and increase productivity.

Teledyne FLIR Inspection Route Creator Plugin: More Efficient, Better Organized Inspections

Designed for thermographers who regularly inspect large numbers of objects over the course of a day, Teledyne FLIR Inspection Route guides the user along a pre-defined route of inspection points so that they can collect images and data in a structured manner.

FLIR Inspection Route Creator PluginClick for larger image

The route begins in Teledyne FLIR Thermal Studio Pro software, where users build their plan using the Route Creator plugin. They can include as many inspection targets as needed and organize them for maximum efficiency. Once the user exports the completed route to the E76 camera, they are ready to begin the day.

The predefined route guides the user's on-site movement to each inspection asset, automatically collecting and organizing saved images for a seamless import into Teledyne FLIR Thermal Studio Pro. By ensuring that nothing is missed and that all inspection results are organized from the start, the suite of Teledyne FLIR inspection software speeds up inspections, improves organization, and simplifies reporting.

More Information
Country of OriginEstonia
BrandTeledyne FLIR
Catalog78512-1101
ConditionNEW
UPC845188022600
Vendor AliasFLIR E76-24
  • 1 - Advanced Thermal Imaging Camera with MSX and UltraMax Technologies, 320 x 240, 30 Hz
  • 1 - 24° Lens
  • 1 - Small Viewfinder Eyecup
  • 2 - Batteries
  • 1 - Battery Charger
  • 1 - Hard Transport Case
  • 1 - Lanyard(s)
  • 1 - Front Lens Cap
  • 1 - Power Suppl(ies)
  • 1 - SD Card (8 GB)
  • 1 - USB 2.0 A to USB Type-C Cable
  • 1 - USB Type-C to HDMI Cable
  • 1 - USB Type-C to USB Type-C Cable
  • 1 - License Card: FLIR Thermal Studio Pro (3 Month Subscription)
  • 1 - FLIR Route Creator Software Plugin for Thermal Studio Pro (3 Month Subscription)
  • 1 - User Manual
Customers Also Bought