This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Desco 19786
Analog Surface Resistance Meter
19786
19786
The Desco 19786 Analog Surface Resistance Meter can be used for determining if a surface is dissipative, conductive, or insulative. The automatic test range voltage selection starts tests at 10 volts and automatically switches to 100 volts if the measurement is over < 1 x 10^5 ohms.
- For determining if surface is dissipative, conductive, insulative
- Portable operation with 9V battery
- LED illumination for low battery power
- NIST calibrated
- Analog compliance verification Surface Resistance Checker
- Used for determining if a surface is dissipative, conductive, or insulative
- Automatic test range voltage selection per compliance verification ESD TR53
- Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over < 1 x 105 ohms
- Portable operation with 9V battery
- No charging or sourcing of special batteries needed
- LED illuminates when battery power is low
- Prevents operator from making bad measurements
- NIST Calibrated
The Desco 19786 Analog Surface Resistance Meter is a portable battery-powered instrument designed to measure resistance point-to-point (RTT) and surface to ground (RTG). The meter is equipped with an automatic test voltage selector. The test voltage will switch from 10V to 100V should the measured resistance exceed 1 x 105 ohms.
Country of Origin | United States |
---|---|
Condition | NEW |
Brand | Desco |
Vendor Alias | 19786 |
- 1 - 9V Alkaline Battery
- 1 - Certificate of Calibration