Megger MIT515

Digital/Analog DC Insulation Resistance Tester with PI Predictor Function, 5 kV, 10 TOhms, 3 mA (No Memory)

MIT515
MIT515
1001-936

Megger MIT515

Digital/Analog DC Insulation Resistance Tester with PI Predictor Function, 5 kV, 10 TOhms, 3 mA (No Memory)

MIT515
MIT515
1001-936

The Megger MIT515 (1001-936) Digital/Analog DC Insulation Resistance Tester offers IR, DAR, and PI functions but no memory functionality. The dual case design includes an outer case for drop protection and fire-retardant inner case. The PI predictor (PIp) function enables faster Polarization Index (PI) testing.

  • Max. Output Voltage: 5 kV
  • Max. Resistance Range: 10 TOhms
  • Short Circuit/Charge Current: 3 mA
  • Safety: IEC 61010-1, CAT IV 600V to 3000m
This product is available for shipping to the US, Canada, and Puerto Rico only.
$4,765.00
This item ships FREE
In stock: 2 Units
  • PI predictor (PIp) function enables faster Polarization Index (PI) testing
  • Ideal for original equipment manufacturers/industrial companies
  • Five preset voltage ranges in insulation test mode
  • User-settable lock voltage range
  • IR, timed IR, DAR, PI diagnostic tests
  • Dedicated voltmeter function (30V to 660V) AC, DC
  • Resistance measurement up to 10 TOhms at 5 kV
  • High current of 3 mA short circuit current
  • High noise immunity of 3 mA noise rejection
  • All terminals safety rated to CAT IV 600V up to 3000m altitude
  • Large range of compatible test leads
  • Intuitive user interface with analog/digital display
  • Simple operation of 2 rotary switches
  • Large LCD backlight display enables multiple results to be displayed simultaneously
  • Graphical quick start guide provided inside lid to assist first time users
  • Tough dual case design
  • Outer case protects tester from knocks/drops
  • Fire retardant inner case
  • IP65 rating prevents moisture/dust ingress when storing/carrying instrument
  • Rapid-charge battery enables 60 minutes of testing after 30 minute charge
  • Li-ion battery offers 6 hours of continuous testing at 5 kV with 100M load
  • Battery meets IEC 2133 standards
  • Operates with flat battery from AC source
Specifications
  • Test Voltage: 250V, 500V, 1000V, 2500V, 5000V, User-defined test voltage
  • User-Defined Test Voltage: 40V to 1 kV in 10V steps, 1 kV to 5 kV in 25V steps
  • Maximum Output Voltage: 5 kV
  • Maximum Resistance Range: 10 TOhms
  • Digital Resistance Range: 10 kOhms to 15 TOhms at 5 kV
  • Analog Resistance Range: 100 kOhms to 10 TOhms
  • Short Circuit/Charge Current: 3 mA
  • Insulation Test Alarm: 100 kOhms to 10 GOhms
  • Capacitance Range (Test Voltage above 500V): 10 nF to 25 uF
  • Current Range: 0.01 nA to 6 mA
  • Interference: 3 mA from 450V to 5 kV
  • Voltmeter Range: 30V to 660VAC/VDC, 45 Hz to 65 Hz
  • Test Modes: IR, IR(T), DAR, PI
  • AC Voltage (Auto-Ranging): 90 to 264Vrms, 47-63 Hz, 100A
  • Battery Life: 4.5 hours (typical) continuous testing at 15 kV with 100 MOhms load
  • Battery Charge Time: 2.5 hours deep discharge, 2 hours normal discharge
  • Maximum Altitude: 3000m
  • IP Rating: IP65 (lid closed), IP40 (lid open)
  • Safety: IEC 61010-1, CAT IV 600V to 3000m

The Megger MIT515 (1001-936) Digital/Analog DC Insulation Resistance Tester is a 5 kilovolt model instrument that is ideal for original equipment manufacturers and industrial companies. This model offers IR, DAR, and PI functions, but no memory functionality. Instrument productivity is the focus of the MIT515 in which rapid-charge batteries and operation from an AC source if the batteries are dead is offered. The rapid-charge batteries enables over 60 minutes of testing after a 30 minute charge.

The safety rating is not compromised on the MIT515 with all terminals safety rated to CAT IV 600V to 3000 meters of altitude. A range of test leads are available for use with this model. Suitably rated high-voltage gloves and other personal protection equipment are required to be worn when testing with this unit.

The MIT515 features a dual-case design and includes a tough outer case to protect the tester from knocks or drops along with an inner case that is fire-retardant. The IP65 rating when the case is closed works to eliminate moisture and dust ingress.

An intuitive user interface ensures that no time is lost on remembering how to use the tester. Simplicity of operation is achieved with two rotary switches and the large backlight display which enables multiple results to be shown simultaneously. A graphical quick start guide is provided inside the lid to assist first time users.

Five preset ranges are provided in the insulation test mode, along with a user-settable lock voltage range. The preconfigured diagnostic tests include Polarization Index (PI), Dielectric Absorption Ratio (DAR), Dielectric Discharge (DD), Step Voltage (SV), and Ramp Test.

PI Predictor Function (PIp)

The Polarization Index test can be time consuming with tests taking up to 30 minutes to complete along with multiple items needing to be tested. The PI Predictor Function (PIp) aids the user in saving precious time. The PIp uses the first part of the IR curve to predict the rest at 5 minutes into the test. This function can start as early as 3 minutes in the test and will stop once it is confident in the prediction.

More Information
Country of OriginUnited Kingdom
BrandMegger
Catalog1001-936
ConditionNEW
Vendor Alias1001-936
  • 1 - MIT515 Insulation Resistance Tester (1001-936)
  • 3 - Test Leads with Medium Insulated Clips, 3m (1008-022)
  • 1 - Power Lead (1008-016)
  • 1 - Calibration Certificate (1000-113)