NetAlly LRAT-1000

LinkRunner AT 1000 Network Auto-Tester for Copper

LRAT1000
LRAT-1000
4040728

NetAlly LRAT-1000

LinkRunner AT 1000 Network Auto-Tester for Copper

LRAT1000
LRAT-1000
4040728

The NetAlly LRAT-1000 LinkRunner AT 1000 Network Auto-Tester is a rugged, fast, and complete copper Ethernet network connectivity tester. It performs an essential set of network connectivity tests, enabling you to quickly and accurately identify and solve network connectivity problems.

  • Test and validate copper Ethernet connectivity in less than 10 seconds
  • Discover nearest switch name and port information via CDP/LLDP/EDP
This product is available for shipping to the US, Canada, and Puerto Rico only.
$1,374.63 Price $1,495.00
This item ships FREE
In stock: 2 Units
  • Test and validate copper Ethernet connectivity in less than 10 seconds
  • Discover nearest switch name and port information via CDP/LLDP/EDP
  • Verify link speed/duplex and connectivity to TCP/IP network with AutoTest
  • Perform unloaded Power over Ethernet (PoE) testing
  • Quickly verify twisted-pair cable length and wire-map
  • Automate reporting and enable collaboration with upload and management of test results via Link-Live Cloud Service
  • Powered by AA battery pack

The NetAlly LRAT-1000 LinkRunner AT 1000 Network Auto-Tester is a rugged, fast, and complete copper Ethernet network connectivity tester. It performs an essential set of network connectivity tests, enabling you to quickly and accurately identify and solve network connectivity problems.

The LinkRunner AT 1000 offers user-configured auto-tests for a wide range of important tasks. This network tester's quick cable test and switch identification facilitate fast problem isolation. Test results can be automatically uploaded to the Link-Live Cloud Service to improve collaboration between network engineers and technicians, creating greater job visibility, project control, and fleet management.

Cable Wiring ValidationCable Wiring ValidationClick for larger image

Cable Wiring Validation

Cable length, Wiremap, and Location

Users can easily find opens, shorts, miswires, and split pairs in three different ways:

  • On non-terminated cable
  • With a WireView Cable Identifier
  • Check patch cord with the built-in wiremap port on the side of the LinkRunner AT
  • Cable Location

Discover Nearest Switch and VLAN

The LinkRunner AT uses the IEEE Link Layer Discovery Protocol (LLDP), along with the Cisco and Extreme Discovery Protocols (CDP and EDP) to display the nearest switch model, slot, port and VLAN configured.

Switch InformationClick for larger image

Switch Information

The LinkRunner AT displays the following critical nearest switch information:

  • Switch name and model
  • Chassis, slot and port
  • Switch IP address
  • Voice and Data VLAN IDs
  • Duplex and speed (actual and advertised)
  • Signal Strength
  • Connection (MDI or MDI/X)
  • PoE voltage and power (actual and test limit)
  • Graphical representation of power on pairs

Key Service and Device Connectivity

AutoTest ResultsClick for larger image

AutoTest Results

LinkRunner AT can perform either a Ping or a TCP port open test to verify connectivity. The test conducted will reveal connection and response time to the default Gateway, preferred DNS server, and alternate DNS server. LinkRunner AT can connect to as many as 10 user-defined target devices, servers or services, testing using Ping, or a user-defined TCP port number. If a URL is used as the target, results will include response time and an IP address.

802.1x Authentication

Configuration SettingsClick for larger image

Configuration Settings

802.1x Authentication

Verify access to secure networks using 802.1x and MAC Access Control Lists (ACL). The included LinkRunner AT Manager Software can be used to enable 802.1x and download certificates.

Automated Test Results Management

Serving as a centralized test results and device management system, the free Link-Live cloud service transforms team workflows with the ability to quickly and easily log, document, and report test activity from all LinkSprinter, LinkRunner AT, LinkRunner G2, LinkRunner 10G, EtherScope nXG, and AirCheck G2 handheld network testers. Once the instrument is connected to the Link-Live Cloud service, your test results are automatically uploaded to the dashboard for project management and reporting. You have the option of uploading additional files, screenshots, images, profiles, packet captures, location information, and comments anytime. Also, certain NetAlly instruments with AllyCare Support can receive firmware updates "over the network" from Link-Live as they become available.

An API is available to retrieve and integrate data from Link-Live into other management platforms, such as your trouble-ticket application or network management system. This gives you the ability to easily provide proof-of-performance and better manage jobs and staff efficiency.

More Information
Country of OriginUnited States
BrandNetAlly
Catalog4040728
ConditionNEW
UPC754082091264
Vendor AliasLRAT-1000
  • 4 - AA batteries
  • 1 - LinkRunner AT Manager Software CD
  • 1 - USB cable
  • 1 - Getting Started Guide
  • 1 - Software CD
  • 1 - Soft case